Product Description

Product Spec Sheet :

60" x 60" ADC-LV Aluminum Lumivent Daylighting Smoke Vent

A combined fire vent and access hatch is crucial for compliance, as it enables the removal of smoke and heat while providing access to the roof. The 165-degree fusible link in the 60" x 60" ADC-LV Aluminum Lumivent Daylighting Smoke Vent, featuring the Thermolatch II, ensures immediate venting. Its insulated, gasketed aluminum frame guarantees a tight weather seal and easy access.

The ADC-LV is a crucial roof unit designed for automatic smoke and heat ventilation, and safe roof access. It features a Thermolatch II® mechanism that activates when a 165°F fusible link melts, allowing heat and toxic gases to escape.

This outdoor access hatch features a durable 11-gauge aluminum frame and a gasketed design for a weather-tight seal. It includes 1-inch rigid fiberboard insulation and gas springs for smooth manual operation. The translucent polycarbonate glazing allows natural light in, complemented by internal and external pull grips and a hold-open arm for added functionality.

Why Should You Use the 60" x 60" ADC-LV Aluminum Lumivent Daylighting Smoke Vent?

• Compliance First: This feature vents smoke and heat during fires, with a 165°F fusible link and a reliable Thermolatch II® lock for compliance.
• Energy-Efficient and Weatherproof: Constructed with 1-inch-thick rigid insulation and a full gasket, this unit stays energy-efficient and watertight.
• Natural Light Access: Clear polycarbonate covers allow natural light to enter, brightening the space and reducing the need for artificial lighting.
• Durable and Resistant: Made from lightweight 11-gauge aluminum, with welded corners that resist corrosion and ensure longevity.
• Safe and Easy Manual Access: Equipped with gas springs, a built-in damper, a hold-open arm, and pull grips for safe and easy manual operation.

Take control of your budget! Lock in fixed prices for your sizes and quantities to avoid rising material costs. Keep your project on track with certainty. Request a personalized quote today!

Product Specification

• Dimension: 60" x 60"
• Frame Material: 11-gauge aluminum (for model LV B), with fully welded corners.
• Cover Frame: Extruded aluminum.
• Glazing: Translucent structured polycarbonate for natural daylighting.
• Flashing System: Bilclip flashing system with integrated cap flashing.
• Insulation: 1-inch rigid fiberboard insulation.
• Sealing: Gasket around the frame for weather tightness.
• Drainage: Fixed center drain.
• Release Mechanism: Thermolatch II® positive hold/release mechanism.
• Trigger: 165-degree fusible link (extra link included).
• Hinge: Pintle hinge.
• Opening Assistance: Gas springs with integral dampers to control the speed of opening and closing.
• Control Arm: Arm guide bracket and guide arm.
• Hold Open: The arm can be held open with a red vinyl grip.
• Manual Opening (Inside): Pull the grip to open from the inside using a 1/8-inch diameter steel cable.
• Manual Opening (Outside): Pull the grip to open from the outside using a 1/8-inch diameter steel cable.
• Finish (Aluminum): Mill finish.
• Hardware Finish: Zinc-plated and chromate-sealed unless specified otherwise.
• Installation: Can be installed on either flat or sloping roofs.

Note: When installed on a slope, the hinge side must run parallel to the slope. If the slope exceeds 30 degrees, factory modification is needed.

Don’t compromise compliance with old fire vents! Select the 60" x 60" ADC-LV Aluminum Lumivent Daylighting Smoke Vent for automatic venting at 165°F. It provides great thermal insulation and easy access, ensuring your roof and property are protected. Call 1 (888) 982-9434 today!